Remaining Battery Life
In the Rate Mode with the BAT indicator
blinking, press the CLR/TEST key. A three-
digit number indicating the approximate re-
maining battery life, in minutes, will be dis-
played.
Attaching the Belt Clip
To attach the supplied belt clip, screw the
clip’s two captive retaining screws into the
threaded inserts at the top of the unit’s rear
panel.
Note: To prevent crossthreading damage, in-
sert each screw loosely, then tighten
them alternately a few turns at a time.
Do not overtighten.
The Carrying Case
If the belt clip is installed, remove it from the
back of the UltraRadiac by unscrewing its two
captive retaining screws and lifting the clip
off the unit.
Now put the UltraRadiac into the carrying
case with the display toward the bottom
(closed) end of the case. To close the case, re-
fer to Figure 2 and…
12
