7
!
To return to the Rate Mode, press the
RATE key.
Clearing the Accumulated Dose
!
Press and hold DOSE + CLR/TEST.
!
The display will flash for a few seconds,
then clear the accumulated dose.
!
To return to the Rate Mode, press the
RATE key.
Reading the Alarm Thresholds
!
Press ALARM + RATE or ALARM +
DOSE.
!
You’ll see an
H
, for High Level Alarm,
displayed.
!
To read the Low Level Alarm setting,
press the RATE (DOSE) key again; the
display will show an
L
.
!
Press the CLR/TEST key; the flashing
display will show the selected (
H
or
L
)
alarm threshold setting.
!
If the Vibrator Alarm has been activated,
the display will alternate between the
threshold value and a vertically scrolling
horizontal bar (
– – –
).
