CANAWELD MMA 201, User Manual

Page: 9 / 24

8
SECTION 2- INSTALLATION, OVERVIEW & SPECIFICATIONS
INSTALLATION
ELECTRICAL

The serial number and rating information is located on the bottom of the machine. Use the rating labels to
determine input power requirements and rated output.

Check whether the voltage value variations are within the acceptable working range with a multi-meter.

(A) The input cable of the machine is ready to be plugged into a 220V compatible connector / socket or
(B) you can remove the installed plug and have the input cable “hard” wired into the appropriate building
electrical panel.

Electrical installation must meet all National and Local Codes− have only a qualified electrician do the
installation.
OVERVIEW
PRODUCT & DESIGN

Our unique electric structure and air channeling design in this series of welding machines are designed to speed
up the heat dissipation of the power device as well as improving the duty cycles of the machine.

The unique heat dissipation design leads to less damage done to the power source and control circuits from
overheating due to dust build up from air inducted by fan.

The whole machine is in form of coherent streamline, the front and rear panels are naturally integrated via
large-radian transition manner.

Front and rear panel are inset with a rubber trim on the leading edge protecting the machine from damage.

The heavy/thick steel base has an anti-rust (corrosion resistant) coating applied to extend the life of the
machine.

Heavy-duty metal casing for protection of internal components. Scratch proof coated surface for long life and
anti-corrosion durability.