16
MANDATORY
Do NOT use an outlet that is controlled by
a light switch.
UNDERSTAND THE SCREEN & KEYPAD CONFIGURATION
Keypad Legend –
the terminology used on the conrol valve label may vary by model. For
the purpose of programming, this manual will use numbers associated with each button
position as shown on right:
The control valve is controlled with simple, user-friendly electronics, displayed on an LCD screen
.
CONNECT THE TRANSFORMER
Connect the transformer to the unit by plugging the 12 volt transformer into a 120 VAC 60 Hz outlet
.
When the power is connected, the screen will show the following information in sequence:
MAIN DISPLAY
The main display will pause on the Date and Time page for 5 seconds. Then it will continually scroll through all of the system diagnostic display
pages. To manually scroll through the diagnostics, press the down or up key. To reset the TOTAL REGENS, TOTAL GALLONS OVER RUN TOTAL, or PEAK
flow rates, press and hold the MANUAL REGEN key the value changes to zero.
PARAMETER
DESCRIPTION
JULY/17/2023 8:30 PM
Month, Day, Year, Time
U1 ONLINE TOTAL 1500 GAL
The current status of Unit #1 (ONLINE or STANDBY). The total capacity of Unit #1.
U1 ONLINE REMAIN 1500 GAL
The current status of Unit #1 (ONLINE or STANDBY). The remaining capacity of Unit #1.
U2 STANDBY TOTAL 1500 GAL
The current status of Unit #2 (ONLINE or STANDBY). The total capacity of Unit #1.
U2 STANDBY REMAIN 1500 GAL
The current status of Unit #2 (ONLINE or STANDBY). The remaining capacity of Unit #1.
LAST REGEN U1 9/24/23
The date of Unit #1 last regeneration.
LAST REGEN U2 9/24/23
The date of Unit #2 last regeneration.
TOTAL REGENS U1 999
The total number of Unit #1 regenerations.
TOTAL REGENS U1 999
The total number of Unit #2 regenerations.
TOTAL GALLONS U1 001590 GAL
The total amount of gallons treated by Unit #1.
TOTAL GALLONS U2 001590 GAL
The total amount of gallons treated by Unit #2.
CURRENT 1.5 GPM PEAK 6.5 GPM
The current flow rate and the peak flow rate since the last regeneration.
REFILL TIME 12:00
The refill time.
VALVE MODE SOFTENER UF
Regeneration mode of operation.