10
D-Tube
Unscrew Spill Cap
Internal O-ring
Tank Seal O-ring
4.
Apply the supplied lubricant (part #92360) to the internal O-ring at the bottom of the control valves.
Apply lubricant to the larger O-ring on the bottom of the valve that seals with the tank threads.
5.
Remove the tape from the top of the riser tube. Carefully position the valve over the riser tube, inserting riser into the internal O-ring.
Turn the valve clockwise into the threads of the tank until secure.
PREPARATIONS
(CONTINUED)
NOTICE
Make sure the quick connect power cord is not yet
connected to prevent the cord getting caught between
the threads of the tank and the valve.
NOTICE
Do NOT use petroleum-based
lubricants as they will cause
swelling of the O-ring seals.
