manualshive.com logo in svg

Canary Systems Lantronix WiBox, Using Manual

Share
Download
Canary Systems Lantronix WiBox Using Manual Download Page 9

 

 

Using the Lantronix WiBox with the CR800 or CR1000

 

9 

Step 4: Test the wireless connection 

At this point the WiBox should be configured for your wireless network. You can test this by opening a web 
browser and typing the WiBox IP address in the address bar. You will be prompted for a user name and 
password. Leave both blank and click OK. If you see the WiBox Home page (shown below), you have correctly 
configured your WiBox. 

 

(Figure 6) 

Note 

− It was noticed that the majority of modern web browsers (e.g. IE11, Chrome 35) are not compatible with WiBox 

web interface. For working with WiBox web interface we recommend using the Lantronix DeviceInstaller™ utility. The 
utility contains an embedded compatible web browser. DeviceInstaller can be downloaded from the Lantronix website: 
(

http://www.lantronix.com/ftp/DeviceInstaller/Lantronix/4.4/4.4.0.1/Installers/Download_Web/setup.exe

). 

Summary of Contents for Lantronix WiBox


















Reviews:

No comments

Brands by name

Popular brands

Load more brands