Using the Lantronix WiBox with the CR800 or CR1000
15
9) First, click on the device IP address you would like to change in the left-hand pane. Then, click on the
Web
Configuration tab
to launch the embedded web browser. Once active, click on the green arrow to the right
of the Address edit to launch the Device's web page. This system will ask you for a username and
password. Both of these fields can be left blank. Click
OK
. If a username and password are required,
contact your IT department.
(Figure 15)
10) Once connected to the Device, the following screen will display. Write down the MAC Address listed in the
header for later.
(Figure 16)
