Using the Lantronix WiBox with the CR800 or CR1000
16
11) Click on
Network
. The following screen will be presented. Make the desired IP Address and Subnet Mask
changes, then click on
OK
at the bottom of the screen. Finally, click on
Apply Settings
. This will store the
changes and then reboot the device. During the reboot sequence you will lose connection.
(Figure 17)
12) Once the device has completed its reboot sequence, a test of the new IP settings will be needed.
13) Follow steps 7 through 10 above but using the new IP address. If the WiBox main screen appears you
have made connection to the device. Compare the MAC address that you noted during prior to changing
the IP address, during step 10. If they match, you know that you have connected back to the same device
and that the new IP address is working properly.
14) Next,
MultiLogger
will need to be changed to match the new IP address. Open MultiLogger on the server.
