Network setting
Click Network on the left side of the console to set it as DHCP (dynamic
access) or static IP (static).
Note: after saving the network settings, you must restart it. You can click
reboot on the left side of the console, or press the reset button to
restart. You can also disconnect the power supply and power on again.
Pool setting
The following figure shows the factory default settings. Normal mode
(normal mode / low power consumption mode) or high performance (high power
consumption mode) can be selected for work mode. When using high
performance mode, please pay attention to using the power supply with
higher power output to avoid damaging the hardware.
Note:
after saving the configuration of the ore pool, it must be restarted.
You can click reboot on the left side of the console, or press the reset
button to restart. You can also disconnect the power supply and power on
again.