Item 4: the current output from the power supply to the hash
board, which is related to the output power and voltage.
Item 5: the output power of the power supply to the hash
board. The normal value is between 3100 and 3300.
Item 6: the desired output voltage of the power supply to
the hashboard, which is configured by the control board.
If the six parameters in the PS field of the power supply are
all 0, it means that the control board cannot communicate with
the power supply. Please check the circuit connection. If the
connection is correct, the power supply PSU needs to be replaced.
3. Check whether the password configuration of mine pool, miner and
miner is correct.
In the background of the mining machine, click pool on the left
column to check the configuration of pool, worker and password.
Finally, click the Save button to save the settings, restart the
machine, and the configuration takes effect
4. Check network setting
Click Network on the left. The default configuration is DHCP
mode. If all the data here is empty, press F5 to refresh the page.
Note that if you need to use static IP configuration. Incorrect
DNS configuration will cause the miner to lose access to the pool.
The commonly used DNS address in China is 114.114.114.114, and
the commonly used DNS address outside China is 8.8.8.8.
Note:
after modifying the configuration, you need to click the
Save button to save the configuration and restart the machine to
take effect.