Problem
The Motion Detection
function does not
work.
Color is not correct.
• Check that MOTION DET in the SPECIAL SETUP
is not set to 'OFF'.
• Check the WHITE BAL settings in the SETUP menu.
The screen flickers
continually.
• Check that the camera isn't facing toward a bright
light source, such as the sun.
RS-485
communication fails.
• Check the polarity between the RS-485 Control Port
and the RS-485 cable.
• Check the RS-485 Communication settings.
Solution
RS-485 Control Port
485 Control Board Connection Port
485+
(+) CONNECTION TERMINAL (TRX+)
(-) CONNECTION TERMINAL (TRX-)
485-
38
Ultra High Resolution Color Camera
39
Ultra High Resolution Color Camera
Specifications (AC24V / DC12V)
■
ITEM
Image Sensor
Total Pixels
Effective Pixels
Scanning System
Synchronization
Frequency
SONY 1/3" Super HAD High Sensitivity Color CCD
811(H) x 508(V) 795(H) x 596(V)
768(H) x 494(V) 752(H) x 582(V)
2:1 Interlace
INT
Horizontal : 15.734 KHz, Vertical:59.94 Hz Horizontal : 15.625 KHz, Vertical:50.00 Hz
600 TV lines
52dB (AGC Off, Weight ON)
NTSC
PAL
Power Consumption
H.Resolution
S/N
Min. Illumination
White Balance
Shutter Speed
Sens-up
Gain Control
DNR
Motion Detection
Privacy Function
V-REV
H-REV
Freeze
Sharpness
Day&Night
DIS
Digital Zoom
Blemish Compensation
Lens Mount
Back Focus Adjustment
0.15Lux (40 IRE)
ATW / AWC / MANUAL(1700
˚
K ~11,000
˚
K)
1/60,1/50 ~ 1/120,000 sec
AUTO / OFF (Selectable x2 ~ x512)
LOW / HIGH / OFF
ON / OFF (1~32 Level)
ON / OFF (8 Zone, ALARM Output)
ON / OFF (12 Zones)
ON / OFF
ON / OFF
ON / OFF
ON/OFF (Level Adjustable)
COLOR / Black&White / AUTO / EXT
ON / OFF
ON / OFF (x16)
256 point (Even 128 Point, Odd 128 Point)
CS Mount (Easy Focus type)
(C Mount is mountable by using adaptor)
Manual
-10
˚
C to + 50
˚
C / 30% to 80% RH
-20
˚
C to + 60
˚
C / 20% to 90% RH
320g
Operating temperature / Humidity
Storing Temperature / Humidity
Weight
AC24V / DC12V DC12V
170mA(AC24V)/260mA(DC12V) 160mA
AC24V / DC12V DC12V
170mA(AC24V)/260mA(DC12V) 160mA
■
Troubleshooting