Note
• When the V-REV or H-REV mode is enabled, the text on the screen
does not flip.
• If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
●
MONITOR : Please change the settings value of video appropriate to
your monitor.
- LCD : Please select this menu item when
using an LCD monitor.
- CRT : Please select this menu item when
using a CRT monitor.
- USER : Please use this menu item when
using a monitor other than standard
ones. You can change the gamma,
PED level, and color gain in the sub menus.
CAMERA TITLE SETUP
M
L
K
J
I
H
G
F
E
D
C
B
A
Z
Y
X
W
V
U
T
S
R
Q
P
O
N
m
l
k
j
i
h
g
f
e
d
c
b
a
z
y
x
w
v
u
t
s
r
q
p
o
n
9
8
7
6
5
4
3
2
1
.
-
D
N
E
S
O
P
R
L
C
→ ←
FRONT DOOR
●
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Up and Down
buttons so that the arrow indicates 'CAM TITLE'.
2) Set it to 'ON' by using the Left and Right buttons.
3) Press the SET button.
Note
• When the CAM TITLE menu is 'OFF', no title will be displayed on the
monitor screen even if you enter one.
• Only English is available in this mode.
• If you move the cursor to CLR and press the SET button, all the letters
are deleted. To edit a letter, change the cursor to the bottom left arrow
and press the SET button. Move the cursor over the letter to be edited,
move the cursor to the letter to be inserted and then press the SET button.
●
SYNC : In areas where the supply is at 60Hz,
you can synchronize the output phase
of multiple cameras using the power
synchronization function (Line-Lock)
without using a synchronization
signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
Note
• As the DIS function uses the digital zoom the camera's resolution will
decrease.
• DIS doesn't operate when background illumination is too low.
• DIS doesn't operate when object pattern is monotonic as like sky or
white wall.
• FONT COLOR : You can change the OSD font color.
(White, Yellow, Green, Red, Blue)
• SHARPNESS : As you increase this value, the picture outline becomes
stronger and clearer. Adjust this value appropriately
depending on the sharpness of the picture.
• RETURN : Select this to save the settings for the IMAGE ADJ. menu
and to return to the SETUP menu.
4) Use the 4 direction buttons to move
to a desired letter and select the letter
by pressing the SET button. Repeat
this to enter multiple letters. You can
enter up to 15 letters.
5) Enter a title, move the cursor to 'POS'
and press the SET button. The entered
title appears on the screen. Select the
position to display the title on the screen
by using the 4 direction buttons and
press the SET button. When the position
is determined, select 'END' and press
the SET button to return to the
SPECIAL menu.
Note
• When using AC power at 60Hz frequency, you can use the L/L type
synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
GAMMA
PED LEVEL
COLOR GAIN
RESET
32
Ultra High Resolution Color Camera
33
Ultra High Resolution Color Camera
■
How to Use the Camera