MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
DC
ATW
3. Set up a selected item by using the Left and Right buttons.
4. To finish and save the settings, select 'EXIT' and press the SET button.
Using this function, you can control the screen brightness.
2. Select the connected lens type by using the Left and Right buttons.
MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.DNR3
7.DAY/NIGHT
8.SPECIAL
9.EXIT
DC
SAVE
ATW
OFF
OFF
ON
COLOR
Select the function using
the UP or DOWN button.
Change the status using
the LEFT or RIGHT button.
LENS
Note
• An item with the icon also has sub-menus. To select a sub-menu,
press the SET button.
• An item with the - - - icon has no sub-menus available for selection.
Note
• When using VIDEO lens, adjust the lens VR explained below first and
set the focus using 'FOCUS ADJ.' menu.
• If color rolling occurs when using a DC lens, set Shutter to A.FLK.
• Some lenses may not work properly, depending on the setting of the
BRIGHTNESS LEVEL.
• When Using a Video-Type Auto Iris Lens
①
Adjust the ALC adjustment terminal on the lens appropriately.
In general, set it to AV (Average).
②
It may not work properly depending on the installed lens. Set the
Level VR of the lens to the optimal value.
③
Set AGC to OFF and adjust the Lens VR to an appropriate brightness.
④
Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the
screen brightness changes properly. Otherwise, adjust the Lens VR again.
1. When the SETUP menu screen is displayed, select 'LENS' by using the
Up and Down buttons so that the arrow indicates 'LENS'.
- Level (VIDEO) : Adjusts the level of video iris signals; the higher the
level is, the brighter the video looks.
- FOCUS ADJ. (DC, VIDEO) : To adjust the DC and VIDEO lens focus
correctly, you must activate the Focus Settings mode under each lens menu.
Activate the Focus Settings mode, adjust the lens focus, and then deactivate
the settings mode. (The VIDEO lens requires an extra step: go to the
sub menu of the Focus Settings mode and change the shutter speed
to adjust the lens brightness.)
- IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the
control speed is too slow or fast, please use this menu to adjust the speed.
1. When the SETUP menu screen is displayed, select
‘
EXPOSURE
’
by
using the Up and Down buttons so that the arrow indicates
‘
EXPOSURE
’
.
EXPOSURE
2. Select a desired mode using the Up and Down buttons.
MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
DC
ATW
●
DC/Video : Select Auto Iris Lens
You can adjust the minimum shutter and maximum value
of ESC shutter mode when DC Lens mode is selected.
●
Manual : Select Manual Lens
3. Each Lens mode has sub menu items as listed below.
- Brightness (DC, Manual) : Adjusts the video brightness.
22
Ultra High Resolution Color Camera
23
Ultra High Resolution Color Camera
■
How to Use the Camera