Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal.' by using
the Up and Down buttons so that the arrow indicates 'White Bal.' .
2. Select a desired mode using the Up and Down buttons.
White Balance (White Bal.)
●
RETURN : Select this to save the changes in the EXPOSURE menu
and return to the SETUP menu.
Note
• When you use a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization
Type, the picture may become unstable if the camera faces a bright fluorescent
light. Therefore, take care when choosing the installation position.
●
SHUTTER : You can select either auto or manual shutter.
- A.FLK : Select this when you experience picture flicker, which can
happen when there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is
selected, the shutter speed is automatically controlled depending
on the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually. (1/60 ~ 1/120,000)
●
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter
the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
●
SENS-UP : When it is night or dark, the camera automatically detects
the light level and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
Note
• If you press the SET button in 'AUTO' mode, You can adjust brightness
by increasing or decreasing the shutter speed. (X2~X512)
• Note that the higher the zoom level, the brighter the screen, but the
more likely it is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP
operation when the zoom level is increased, this is normal.
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
25
ESC
HIGH
OFF
MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
DC
ATW
OFF
OFF
※
Select one of the following 5 modes, as appropriate for your purpose.
●
ATW : Select this when the color temperature is between 1,700
˚
K
and 11,000
˚
K.
●
OUTDOOR : Select this when the color temperature is between 1,700
˚
K
and 11,000
˚
K. (sodium light inclusion)
●
INDOOR : Select this when the color temperature is between 4,500
˚
K
and 8,500
˚
K.
●
MANUAL : Select this to fine-tune White Balance manually. Set White-
Balance first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and then press the SET button.
●
AWC
→
SET : To find the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the Function
Setup switch. If the environment changes, readjust it.
24
Ultra High Resolution Color Camera
25
Ultra High Resolution Color Camera
■
How to Use the Camera