CPB-516 Operation and Maintenance Manual – TTS 30-40-45 Series (excluding 45-1814) (01-2020)
23
3. Tighten the special cap screw on the opposite side of the same undercarriage to
specification. (Cap screw torque is 300 Nm (221 ft-lb). Tighten cap screw loosened
in step 2 to the same specification.
Note: A single full turn is the standard
increment during adjustment. Lessen this amount as final adjustment is
approached.
4. Recheck track alignment and adjust until suitable clearance is obtained on both
sides of the guide lugs.
Note: Lock plates are reversible for double the index
increments. If needed, increase torque on the special cap screw slightly
allowing advancement to a suitable lock plate position.
5. When alignment is complete, reinstall the lock plates and tighten cap screws to
their required torque specification of 130 Nm (95 lb-ft).
Summary of Contents for TTS 30 Series
Page 28: ...Camso co Camso 2019 ...
