6
4. Insert M10x80mm bolt (
B6
), provided in the
installation kit, in the rear anchor bracket (
B1
-
B2
)
as shown in Fig. 4
Fig. 4
CAUTION: Make sure that the bolt is inserted in the
right direction. See Fig. 5
Fig. 5
5. Install anchor bracket (
B1
-
B2
) under lower
suspension arm; C-shaped openings on bracket
must be located over suspension arm tubes. See
Fig. 6
Fig. 6
6. Insert the M10x65mm bolt (
B5
) in the bracket hole
aligned with C-shaped hooks, install spacer bushing
(
B7
) and nut (
B10
) on bolt. Tighten assembly to 50
N•m [37lb•ft] of torque. See Fig. 7
NOTE: Arrow cutout in anchor bracket must face front
of vehicle.
Fig. 7
7. Position bracket cover (
B3
) over lower suspension
arm. Insert appropriate bolts [M10x55mm (
B4
) or
M10x80mm bolts (
B6
)] through bottom. Set
washers (
B9
) over bolt head and under nut installed
in oblong holes present in bracket plate and cover.
Use nuts (
B10
) to secure assembly. See Fig. 8
Fig. 8
