8
FRONT TRACK SYSTEM
INSTALLATION
1. Remove front wheels. Make sure that wheel studs
and wheel hubs are free of dirt.
2. If applicable, remove CV joint protectors.
3. Remove bolts, nuts, washers and bushings from
front stabilizing rod ends as shown in Fig. 13
Fig. 13
4. Insert bolt in front anchor brackets (
A1
-
A2
) as
Fig. 14
CAUTION: Make sure that the bolt is inserted in the
right direction. See Fig. 15
Fig. 15
5. Position bottom part of anchor bracket assembly
(
A1
-
A2
) under lower suspension arm. Position
bracket cover (
A3
-
A4
) over suspension arm. Align
holes and insert the cover's tenon in the mortise cut
in the bottom part. Refer to Fig. 16
Fig. 16
6. Insert the M10x55 mm bolts (
A5
) through the
bottom and secure the two parts together with the
nuts (
A6
) provided. Tighten assembly to 50 N•m [37
lb•ft] of torque. See Fig. 17
Fig. 17
