7
9. Secure undercarriage to rear hub using the
vehicle’s lug nuts. Use bolt circle
Ø110 mm
.
See
CAUTION: If needed, take rubber protector off
of hub.
CAUTION: Follow torque specification indicated by
vehicle manufacturer when tightening wheel nuts.
Fig. 10
10.Attach stabilizing rod (
2
) to anchor bracket (
1
),
using the long spacer bushing (
3
), short spacer
bushing (
4
), flat washer (
5
) and nut (
6
). Torque to
70 N•m [52 lb•ft]. See Fig. 11
CAUTION: Components must be assembled in the
order shown.
Fig. 11
11.Verify that spring assembly bolt (
7
) is tightened to
the recommended torque specification: 75 N•m [55
lb•ft]. Refer to Fig. 12
Fig. 12
12.Inspect the rear track systems and ensure that all
mounting bolts were correctly tightened during
installation.
