CPB-515 Operation and Maintenance Manual
– TTS 45, 70, 80,100, 110 Series (10-2017)
15
5.0 SCHEDULED MAINTENANCE
5.1 General information
Three factors: proper use, regular inspections, and maintenance are essential to ensure proper
performance and reliability of your Camso TTS track system.
It is strongly suggested to respect the recommended maintenance and inspection schedule in this
section for best track system life, proper performance, and reduced downtime.
Before any operation, clean all debris and material from the track system and make a general
analysis of the machine condition. Pay attention to components subject to wear such as rubber
parts: the quick identification of unusual wear, particularly of the track. Identifying and resolving
issues early reduces downtime and operating costs.
IMPORTANT
Routine and extra maintenance must be performed by qualified and
authorized personnel.
Before starting any kind of operation on the machine, disconnect the
transmission, stop the engine, set on the emergency brake, remove
the key and allow machine to stop completely and cool.
Make sure that mobile parts with safe fixed positioning are locked and
the tools used for maintenance are suitable for the type of service
Camso is not responsible for direct or indirect damages occurred to
people or things due to tampering, removal or modification of the
safety devices, or caused by modifications of the machine without any
previous authorization.
5.2 Lubricant Table
Use and description
Location
Viscosity grade
Grease for heavy
mechanical components
Carrier Axle hubs/bearings
and frame pivot joints
NLGI GC-LB
Oil Bath Reservoirs
Idlers and Midroller Hubs
and Midroller axle pivots
10W30 Universal
Transmission / Hydraulic Oil
