6
A single heating plate the maximum heating power can be 2000W. When two heating plates at same time heating, the internal controller
will coordinate the heating plates, the sum of the power does not exceed 3500W to ensure the safety of electricity.
11.Temperature icon 12. Power supply icons
DESCRIPTION
Example: Principle of operation.
6.
Never operate the appliance with wet hands.
7.
When you suspect that the appliance has been damaged NEVER try to repair it on
yourself.
A. Induction cooker
5. Timer button 6. Child lock
7. Display window 8. Child lock icon
The operation is the same for both left and right heating plate.
3. Time / Temperature decrease button 4.Time / Temperature increase button
1. Power button 2. Option button for power/temperature level
8
Do not wash the appliance under running water or so that water could penetrate it.
9. Timer icon 10. Power icon
the appliance and its components before use
d.
The devices contains two independent heating plates, each heating plates can be individually switched and add or reduce power, or
add or reduce temperature.
NOTE: NEVER heat empty cookware. This will cause the unit to overheat, damage the cookware and/or cause the unit to shut off.
HOW TO USE
1. Place the induction cooker on a dry and flat surface.
NOTE: When the unit is off, the fan may continue running until the temperature of the induction cooker is below 50
℃
.
3.The operation is the same for both left and right heating plate.
NOTE: If the cookware is removed from the induction cooker at any time during the cooking cycle, the unit will beep sound for 60
seconds, error code E00 will appear in the display window (7) and the unit will shut off automatically.
NOTE: Cookware bottom diameter should be no less than 12 cm or more than 22 cm in order to work correctly. If the cookware is larger
than the cookware placement guides indicated on the induction cooker, the area outside these guides will not work causing an
inconsistent heating pattern.
E00:No pot. There is need to put the pot on the heating plate to operate the unit.
E01:Low voltage.
E02:Over voltage.
If error codes E01,E02,E03,E04,E05,E06,E07,E09,E0b,E0d,E12 are reported, please contact the service center for inspection and
repair.
2. Add food to the cookware.
BEFORE FIRST USE
3. Put the cookware within the place indicated on the induction cooker surface.
NOTE: When the unit is turned off, the fan will continue running and the display window (7) will also display ”H” until the temperature of
the induction cooker is below 50
℃
.
Error Codes:
1.When the left heating plate is set to 2000W, and then try to set up 2000W the right plate also, the left heating plate power will
decreased to 1400W, and the right heating plate will operate with 2000W power.
NOTE: Ensure that the bottom of the cookware is clean as dirt may cause the bottom to be sticked to the induction cooker’s surface.
Remove the packing elements and align the power cord.
NEVER heat empty cookware. This will cause the unit to overheat, damage the cookware, and/or cause the unit to shut off.
NOTE: If the induction cooker has been turned on without a compatible pot in place the unit will beep for approximately 60 seconds,
error code E00 will be appear in the display window (7) and the unit will shut off automatically.
2.Both left and right heating plates can be set to maximum temperature of 240
℃
