Leak testing
WARNING:
Never use an open flame to test for gas leaks, as property
damage, personal injury, or death could result.
The water heater and its gas connections must be leak tested at normal operating
pressures before it is placed in operation.
● Turn on the gas shut-off valve(s) to the water heater.
● Use a commercial leak detector or soapy water solution to test for leaks at all
connections and fittings. Bubbles indicate a gas leak that must be corrected.
The factory connections should also be leak tested after the water heater is
placed in operation.
High altitude
Ratings of gas water heaters are based on sea level operation and need not be
changed for installations at elevations up to 2,000 feet.
Unit not recommended for elevations in excess of 2,000 feet.
Installing the water heater
Flue outlet location
The location of the Flue outlet depends on the following mini mum clearances and
considerations (see illustration):
Additional Considerations
21
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475