Campbell RF450, Instruction Manual

Page: 24 / 46

RF450 Spread Spectrum Radio
4.8 Slave
Radios configured as Slaves in a multi-point network are allowed to
communicate with a multi-point Master (see FIGURE 4-8 ). The Slave may
communicate with its Master through one or more repeaters.
FIGURE 4-8. DevConfig Screen Showing Settings for a Slave in a
Multi-Point Network
4.9 Repeater
Setting the Radio Operation Mode to “Multi-Point Repeater” allows the
transceiver to operate as a repeater in a multi-pPoint network. The “Repeaters
Used” box should be checked if there are any repeaters in the network; it
should be set the same for all transceivers in a multi-point network (see
FIGURE 4-9 ).
FIGURE 4-9. DevConfig Screen Showing Settings for Repeater in a
Multi-Point Network
14