Campbell RF450, Instruction Manual

Page: 15 / 46

RF450 Spread Spectrum Radio
FIGURE 4-4. Start-up DevConfig Screen for Configuring the RF450
3. Select the correct COM port for serial communications with the radio.
4. Power the RF450 radio by using the power plug or by using the SC12
cable to connect the radio’s CS I/O port to the datalogger’s CS I/O port.
5. Connect an RS-232 or USB-to-RS-232 cable between the RF450 and PC.
6. Click Connect then press the green “setup” button located on the side of
the RF450 between the RS-232 and power ports. The radio CD and CTS
LEDs should turn green. After several seconds, a screen similar to
FIGURE 4-5 will appear:
5