Campbell RF450, Instruction Manual

Page: 38 / 46

Appendix A. Installation Scenarios
Remember, each datalogger must have a unique PakBus Address.
Master
RF450
Slave 12
Slave 11
PC Running
LoggerNet
/PC400
Repeater
1
Slave/
Repeater
Slave 22
Slave 21
FIGURE A-7. Schematic of PC-to-RF Network with Parallel Repeaters
(using the SubNet ID)
TABLE A-3. RF450 Settings for Example 3
Master Repeater Slave/Repeater
Slave
11, 12 etc.
Slave
21, 22 etc.
Hardware(d) PC running
LoggerNet , RF450
RF450 CR1000, RF450 CR1000,
RF450
CR1000,
RF450
Baud Rate 115.2K 115.2K 115.2K 115.2K 115.2K
Radio Operation
Mode
Multi-Point Master Multi-Point
Repeater
Multi-Point
Slave/Repeater
Multi-Point
Slave
Multi-Point
Slave
Repeaters Used Yes; check box Yes; check
box
Yes; check box Yes; check
box
Yes; check
box
Network ID (a) 1726 1726 1726 1726 1726
Frequency Key
(a)
1 1 1 1 1
Receive SubNet
ID
NA 0 0 1 2
Transmit SubNet
ID
15 (default) 1 2 0 0
Radio ID 4094(b) 2 3 (c) 11, 12 etc.
(c)
21, 22, etc
(c)
Notes:
(a) your Network ID and Frequency Key may be different
(b) to match LoggerNet’s PakBus Address
(c) to match CR1000's PakBus Address
(d) not inclusive; other typical hardware items may include power supply, antenna, enclosure, etc.
NA = not applicable
A-6