Campbell RF450, Instruction Manual

Page: 33 / 46

Appendix A. Installation Scenarios
A.1 Example 1: PC-to-RF Network
In this example, the Master radio is connected to a PC running
LoggerNet
(see
FIGURE A-1 ). Slave radios are connected to CR1000s in the field. LoggerNet
may be used to view real-time values from the dataloggers, collect data, set
datalogger clocks, and send programs.
Remember, each datalogger must have a unique PakBus Address.
Master
RF450
Slave
Slave
Slave
PC Running
LoggerNet
/PC400
FIGURE A-1. Schematic of PC-to-RF450 Network
Using DevConfig setup the Master and Slave RF450 radios according to
TABLE A-1 below. The Deployment tab of DevConfig should look similar to
FIGURE A-2 .
A-1