Campbell Redwing CDMA1X, Instruction Manual

Page: 8 / 11

Redwing CDMA1X AirLink Cellular Modem
Step A T Commands Response Description
1
A T+WSPC=1,xxxxxx
(where
xxxxxx represents the lock code of
your modem.
Example
A T+WSPC=1,123456)
OK
Un l ocks the modu l e for service
provisioning AT commands.
2
A T+W M DN=[ M DN]
Examp l e:
AT+WMDN=435 2 551 2 1 2
OK
Enter the MDN here. The MDN is
the number used to dia
l this device.
3
A T+WI M I=31000[ M IN]
Examp l e:
AT+WIMI=31000435 2 551 2 34
OK
Enter the MIN here. The
31000
must precede the MIN. The MIN
is the number used to identif
y this
device on the ce ll u l ar provider’s
network. This number ma y be the
same as the MDN.
OK
Commits the changes done during
the service programming session.
4
A T+WC M T=1
+WIND:8
Commission of these changes wi ll
force a software reset of the
modu
l e.
5
A T+CDV*22890
+WORG:* 22 890
+WCNT:3
+WOT1:”Programming in progress”
+WOT
S :” S PL un l ocked”
+WOTP:”PRL Down l oad OK”
+WOTM:”MDM Down l oad OK”
+WOTC:”Commit S uccessfu l ”
+WOT 2 :”Programming S uccessfu l !”
*
resu l ts ma y var y *
Initiates over-the-air update. You
must have ce
ll u l ar coverage with
good signa l strength for this to be
successfu l .
There are no O’s in the above strings, the y are Zero’s. NOTE
3.5 Programming the Redwing for use with a datalogger
The Redwing needs a few settings changed in it to power-up read y to work
with the data l ogger.
4