Campbell Redwing CDMA1X, Instruction Manual

Page: 9 / 11

Redwing CDMA1X AirLink Cellular Modem
Step A T Commands Response Description
6
A TS0=1+CICB=0
OK
S ets auto answer in data mode.
7 A T+IFC=0,0 OK
Disab l es l oca l f l ow contro l .
S ets the Redwings R S2 3 2 baud
rate and saves settings.
Use the fo ll owing to determine
baud rate:
CR800
CR1000
CR5000
115 2 00
CR 2 3X
38400
8
A T+IPR=[baud rate]; &W
Examp l e:
AT+IPR=9600; &W
OK
CR10(X)
CR510
CR
2 00
CR7
9600
In the above strings, a ll “0” = zero. NOTE
Remove the power from the modem and power it up again. It shou l d be read y
to use at the baud rate set in S tep 8. Test the communications before dep l o y ing
the modem.
3.6 Setup LoggerNet (Option A)
1. S e l ect Add Root | TapiPort.
2 . Add a TapiRemote to the TapiPort.
3. Add a data l ogger to the TapiRemote.
4. On the TapiPort page:
a. S e l ect Communications Enab l ed.
b. If y ou are using the Ca ll -back feature of the data l ogger on an y of
y our stations, se l ect Ca ll -Back Enab l ed.
c. S e l ect y our insta ll ed modem on the Tapi Line.
d. Extra Response Time can remain as 0 seconds.
5. On the TapiRemote un-check “Use Tapi Dia l ing Properties.“
5