Campbell PC208W, Instruction Manual

Page: 43 / 156

Section 2. Program: EDLOG
PC208W, Version 3.3, Instruction Manual 2-3
File Edit Search Compile Display Options Window Help
Contents
How to Use Help
About
Tile
Cascade
New
Open
Save (<Ctrl>S)
Save As
View File
Close (<Ctrl><F4>)
Close All
Print (<Ctrl>P)
Print to File
Print Setup
Document DLD File
Exit (<Alt><F4>)
(Filename)
Allows a topic to be selected
from a list.
Lists version number and
copyright date.
Displays windows on an equal portion of the screen.
Only the title bars of the inactive windows are shown.
Creates a new datalogger program
Edits an existing program
Saves the current datalogger program
Saves the current datalogger program under a new name.
Opens file in view only mode (file cannot be edited).
Closes only the active window.
Closes all of the windows.
Sends current program to printer.
Sends current program to a printable file.
Changes print settings.
Documents a file that was created with the keyboard/display or an earlier version of EDLOG.
Exits EDLOG and returns to PC208W.
Name of last program edited.
Pastes EDLOG text to Windows clipboard (see Section 2.6.2).
Copies EDLOG text (see Section 2.6.2).
Copies text at cursor location (see Section 2.6.2).
Deletes highlighted text.
Formats the selected text or instruction as a comment.
Changes the commented text or instruction to uncommented.
Displays the text that will be inserted if the Paste option is used.
Creates a library file (see Section 2.6.3).
Inserts a library file (see Section 2.6.3).
Allows an instruction to be selected from a list (see Section 2.4).
Deletes an instruction.
Accesses the Input Location editor (see Section 2.7.3).
Lists the final storage locations affected by the selected output processing instruction.
Displays a table listing of Mode 4 parameters.
Search (<Ctrl>F)
Search Again (<F3>)
Compile Program
Checks program syntax and creates a .DLD File.
Renumber
Rebuild Indention
Compress (<F7>)
Uncompress (<F7>) Renumbers instructions.
Resets indentions to parameters specified in automatic indentions
Displays only the first line of each instruction.
Displays all lines of each instruction.
Editor
Show Toolbar
Font
Program Security
Final Storage Area 2 (CR10, CR10X)
Datalogger ID (CR10X, CR500)
Power-Up Settings (CR10X)
Compile Settings (CR23X)
RS-232 Initial Baud/Power Settings (CR23X)
Enables/disables automatic re-numbering,
data entry warning, and automatic
indentions.
Displays a "Speed bar" for certain EDLOG
functions.
Selects font for EDLOG display.
Sets datalogger security codes.
Sets the amount of final storage area 2
memory.
Assigns an identification label to a
datalogger.
Clears or retains settings for ports, flags,
and storage.
Clears or retains settings for ports, flags,
and storage.
Sets initial baud rate and RS-232 power.
Cut (<Ctrl>X)
Copy (<Ctrl>C)
Paste (<Ctrl>V)
Delete (<Ctrl>Del)
Comment (<Ctrl><N>)
Uncomment (<Ctrl><N>)
Show Clipboard
Save to Library File
Insert Library File
Insert Instruction (<Shift><Ins>)
Delete Instruction (<Shift><Del>)
Input Labels (<F5>)
Final Storage Labels
View Mode 4 Table (CR10, CR10X, CR500, CR23X)
Searches for a string of text.
Performs search again.
FIGURE 2.1-1. EDLOG Menu