Campbell PC208W, Instruction Manual

Page: 142 / 156

Appendix C. PC208W Error Messages
C-2 PC208W, Version 3.3, Instruction Manual
Illegal character in expression.
Check the last line that you were editing. SPLIT would not take some
character. Experiment to see what it does not like.
"(" without ")".
Check your parentheses. You must have the same number of left parentheses
as you do right parentheses.
Function without "(".
Check all Math, Time Series, and Special functions for a missing left
parenthesis.
Function without ")".
Check all Math, Time Series, and Special functions for a missing right
parenthesis.
Illegal value inside [].
In the SELECT line check that left and right brackets have been included.
Also, verify that two periods (..) have been included. Only digits can be used
for the beginning and ending numbers.
Element value not in range 1..254.
SPLIT cannot work on more than 254 elements at a time. Also, one element in
the Select option cannot exceed the buffer size for an element. Try shortening
the length of the expression between commas.
Length of heading too large for field width.
Column heading is too wide.
Illegal Output Filename.
Output file cannot have same name as input file.
There was a problem opening an input file. File could not be found or
may be in use.
Ensure a valid input file was chosen, and that the file is not opened in another
program.
If multiple input files have been specified, the input file name length may have
been exceeded. The input file length is 253 characters. If file names have
paths defined, this limit may be exceeded. Try deleting the path from each
file's name by editing the Input Data File field.
Date functions must include year.
Check the Select line for a Date function without a year.
Invalid decimal place entry. Valid values are 0 to 9.
Check the Report and Columns heading section. Up to 9 decimal places may
be specified.
Selected array not found in "Copy Condition", Cannot paste.
When you’re pasting an element in the Select line using Final Storage Labels,
the array you are selecting from must be found on the Copy line. If the Copy
line is blank, SPLIT will add it for you but you must add it otherwise.