Campbell PC208W, Instruction Manual

Page: 141 / 156

PC208W, Version 3.3, Instruction Manual C-1
Appendix C. PC208W Error Messages
C.1 SPLIT Error Messages:
Parameter following ";" must be an integer.
Check the Time Series functions where an output interval has been assigned.
Invalid range specified inside [], or expression buffer overflow.
On the Select condition line you should check that the range specified has two
periods (..) or that only digits are used as delimiters. Also, check for a missing
right or left bracket.
Input file does not exist or is not a data file, or has the same name as the
output file.
Check the data file to see that it is valid.
Parameter file is too big.
You have exceeded the maximum parameter file size of 4700 bytes.
Illegal value for time.
In the Start parameter with the Time Sync option SPLIT did not recognize the
time option. Check that the time is specified properly (day:hrmn:sec). Refer
to the SPLIT section for proper syntax.
Illegal array element # specified.
You have specified an element number that does not exist. Most commonly,
you forgot to put a "." in a fixed value so SPLIT thinks it is an element
number.
Value inside [] missing or illegal.
Check the Start, Stop, and Copy syntax to verify that you have not missed a
value or entered a value that is not valid.
Too many "and" conditions in expression.
There is a maximum of three elements that can be connected with “ and”
statements.
Too many "or" conditions in expression.
There is a maximum of six elements that can be connected with “ or”
statements.
Line length too long.
253 characters maximum.
More than 8 files specified.
Check that no more than 8 Input files have been specified. Check your syntax
for a filename. Remember, SPLIT will add .DAT to a filename if a "." is not
included.
"." without a number.
Check the Select Line for a "." that is not associated with a fixed value.