Campbell ET107, Instruction Manual

Page: 96 / 110

Appendix B. PS24 24 Ahr Power Supply and 10 x 12 inch Enclosure
6. The bottom enclosure bracket has a small metal locking mechanism. Push
up on the small Phillips screw underneath the mechanism and slide it to
the left. Once in place, put a small wire tie in the hole to the right of the
locking mechanism (see Figure B.2-5).
To remove the enclosure from the bracketing, cut off the wire tie,
slide the lock to the right, and lift the entire enclosure off the
bracketing. NOTE
FIGURE B.2-5. Enclosure Locking Mechanism
B-8