manualshive.com logo in svg

Campbell CR9000, Instruction Manual

The Campbell CR9000 Instruction Manual is essential for users of this reliable product. With detailed step-by-step instructions, it ensures a seamless setup and operation. Download the manual for free from our website and unlock the full potential of your Campbell CR9000.

Share
Download
background image

i 

CR9000 Table of Contents 

Overview..................................................................... OV-1 

OV1.  Physical Description ......................................................................OV-1 

OV1.1  Basic System .........................................................................OV-1 
OV1.2  Measurement Modules ..........................................................OV-3 
OV1.3  Communication Interfaces ....................................................OV-8 

OV2.  Memory and Programming Concepts ............................................OV-9 

OV2.1  Memory .................................................................................OV-9 
OV2.2  Measurements, Processing, Data Storage..............................OV-9 
OV2.3  Data Tables..........................................................................OV-10 

OV3.  PC9000 Application Software .....................................................OV-10 

OV3.1  Hardware and Software Requirements................................OV-11 
OV3.2  PC9000 Installation .............................................................OV-11 
OV3.3  PC9000 Software Overview................................................OV-11 

OV4.  Specifications...............................................................................OV-14 

1.  Installation.................................................................1-1 

1.1  Enclosure .............................................................................................. 1-1 

1.1.1  Connecting Sensors..................................................................... 1-1 
1.1.2  Quick Connectors ....................................................................... 1-1 
1.1.3  Junction Boxes ............................................................................ 1-2 

1.2  System Power Requirements and Options............................................ 1-3 

1.2.1  Power Supply and Charging Circuitry ........................................ 1-3 
1.2.2  Connecting to Vehicle Power Supply ......................................... 1-6 
1.2.3  Solar Panels................................................................................. 1-7 
1.2.4  External Battery Connection ....................................................... 1-7 
1.2.5  Safety Precautions....................................................................... 1-8 

1.3  Humidity Effects and Control............................................................... 1-8 

1.3.1  Desiccant..................................................................................... 1-8 
1.3.2  Nitrogen Purging......................................................................... 1-8 

1.4  Recommended Grounding Practices..................................................... 1-9 

1.4.1  Protection from Lightning........................................................... 1-9 
1.4.2  Effect on Measurements:  Common Mode Range ...................... 1-9 

1.5  Use of Digital Control Ports for Switching Relays............................. 1-10 

2.  Data Storage and Retrieval ......................................2-1 

2.1  Data Storage in CR9000 ....................................................................... 2-1 

2.1.1  Internal Static Ram...................................................................... 2-1 
2.1.2  Internal Flash Memory................................................................ 2-1 
2.1.3  9080 PAM Module — PCMCIA PC Card.................................. 2-2 

2.2  Internal Data Format............................................................................. 2-2 
2.3  Data Collection ..................................................................................... 2-3 

2.3.1  The Collect Menu ....................................................................... 2-4 
2.3.2  RealTime Write File.................................................................... 2-6 
2.3.3  Logger Files Retrieve.................................................................. 2-7 
2.3.4  Via PCMCIA PC Card................................................................ 2-8 

Summary of Contents for CR9000



























































































































































































































Reviews:

No comments

Related manuals for CR9000

LATNEX RF Explorer User Manual preview
RF Explorer
Brand: LATNEX Pages: 55
Laser Technology TruPulse 200X Quick Reference Manual preview
TruPulse 200X
Brand: Laser Technology Pages: 11
Laser Technology TruPulse 200X User Manual preview
TruPulse 200X
Brand: Laser Technology Pages: 62
Sanmenxia ZX400 Operation Manual preview
ZX400
Brand: Sanmenxia Pages: 17
SANKO SM-1100 Instruction Manual preview
SM-1100
Brand: SANKO Pages: 25
Samson 2162 Parts And Technical Service Manual preview
2162
Brand: Samson Pages: 2
YOKOGAWA BT200 User Manual preview
BT200
Brand: YOKOGAWA Pages: 53
Palstar ZM-30 Owner'S Manual preview
ZM-30
Brand: Palstar Pages: 37
LD Didactic Pocket-CASSY 2 Operating Instructions preview
Pocket-CASSY 2
Brand: LD Didactic Pages: 2
Aqua Lung PHODS Technical Manual preview
PHODS
Brand: Aqua Lung Pages: 24
XS Scuba VX200-N-VI Series Service Manual preview
VX200-N-VI Series
Brand: XS Scuba Pages: 34
Tektronix MTX100B Technical Reference preview
MTX100B
Brand: Tektronix Pages: 116
LaserLiner LaserRange-Master T4 Pro Operating Instructions Manual preview
LaserRange-Master T4 Pro
Brand: LaserLiner Pages: 68
Farnell MarMonix MSL-765 User Manual preview
MarMonix MSL-765
Brand: Farnell Pages: 15
Shimadzu TOC-V CPH User Manual preview
TOC-V CPH
Brand: Shimadzu Pages: 22
Eddy Wireless CMS-15 Instruction Manual preview
CMS-15
Brand: Eddy Wireless Pages: 18
Gude Expert PDU energy 8001 Manual preview
Expert PDU energy 8001
Brand: Gude Pages: 22
ILITCH ELECTRONICS CVNCS-JR User Manual And Installation Instructions preview
CVNCS-JR
Brand: ILITCH ELECTRONICS Pages: 2

Brands by name

Popular brands

Load more brands