Campbell CR9000, Instruction Manual

Page: 42 / 218

Section 2. Data Storage and Retrieval
2-10
Station Name
The station name set in the logger that the data was collected from.
Logger Model
The datalogger model that the data was collected from.
Logger Serial Number
The serial number of the logger that the data was collected from. This is
the serial number of the CR9000 CPU.
Operating System Version
The version of the operating system in the logger that the data was
collected from.
DLD File
The name of the DLD file that was running when the data were created.
DLD Signature
The signature of the DLD file that created the data.
Table Name
The data table name.
Field Name
The name of the field in the data table. This name is created by the
CR9000 by appending underscore ( _ ) and a three character mnemonic for
the output processing.
Field Units
The units for the field in the data table. Units are assigned in the program
with the units declaration.
Field Processing
The output processing that was used when the field was stored.
Smp = Sample
Max = Maximum
Min = Minimum
Avg = Average
Field Data Type
This header line is only in TOB1 binary format and identifies the data type
for each of the fields in the data table.
UINT4 = Unsigned 4 byte integer
IEEE4 = 4 byte floating point
Time Stamp
This field is the date and time stamp for this record. It indicates the time,
according to the logger clock, that each record was stored.