CM106BE Tripod
4
3.3
Tools List (for tripod, mast, enclosures, and crossarms)
13 mm and 10 mm open end wrenches
Adjustable wrench
Phillips head screw drivers (medium, small)
Straight bit screwdrivers (large, medium)
300 mm torpedo level
Side-cut pliers
Pencil
Tape measure
Compass and site declination angle
Shovel
Sledge hammer (for driving ground rod and stakes)
Step ladder
4.
Overview
The CM106BE (Figure 4-1) is constructed from galvanized steel, with
individually adjustable legs that allow installation over uneven terrain.
The CM106BE includes lightning and ground rods, ground cables, UV resistant
cable ties, and stakes for securing the tripod feet to the ground. An optional guy
kit is recommended for sites that experience high wind speeds (see Section 5,
Specifications
). Instrument enclosures can be purchased with mounting brackets
that attach to either the mast or leg section as shown in Section 6.1.7,
Enclosure
Attachment
.
The CM106BE can be used for a variety of applications. For meteorological
stations, sensors are mounted to the tripod using mounting brackets appropriate for
the model of sensor. For non-meteorological applications, the tripod can be used
to mount instrument enclosures, solar panels, junction boxes, or antennas.
Figure 4-1. CM106BE tripod with lightning rod and guy wires
Summary of Contents for CM106BE
