Campbell CH201, Product Manual

Page: 26 / 44

FIGURE 6-4. Battery family list
Set the Battery Family to match the battery family being used. The default settings are Battery
Capacity of zero (0) and Battery Family of EnerSys/Genesis NP Series. Setting the Battery Capacity
to zero (0) forces the charger to only float charge the battery. Battery Capacity must be changed
to allow cycle charging.
Table 6-1 (p. 17) shows the default settings for each battery family. The
settings are based on the following equation:
V
charge
(T) = C
0
+ C
1
(T-25°C) + C
2
(T-25°C)
2
Where:
T = Battery temperature in ° C.
C
2
= 0 for linear charge voltage vs. temperature relation.
CH201 12V Charging Regulator 16