Campbell Hausfeld TL140289 User Manual Download

Page: 1 / 12

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

For parts, product & service information

visit

www.chpower.com

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

IN738200AV 1/12

See Warranty on page 6 for important information about commercial use of this product.

Operating Instructions

TL140289

Impact

Wrenches

Table of Contents

Description   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1
Unpacking  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1
Safety Guidelines   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1
General Safety Information  .  .  .  .  .  .  . 1-2
Operation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Storage   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Troubleshooting Chart  .  .  .  .  .  .  .  .  .  .  .  .  .4
Warranty   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6

Description

Impact wrenches are air tools designed
for removing and installing nuts and
bolts . Impact wrenches have different
impact mechanism types such as rocking
dog, pin clutch and twin hammer
(double jumbo) .
The rocking dog and pin clutch types
are used as general purpose tools by
DIY’ers and hobbyists . Twin hammer
wrenches are for use by the professional
in tire shops, assembly line applications
and for removing high torque bolts .

Unpacking

When unpacking this product, carefully
inspect for any damage that may have
occurred during transit . Make sure any
loose fittings, bolts, etc ., are tightened
before putting this product into service .

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DO NOT DISCARD

Safety Guidelines

This manual contains information
that is very important to know and
understand . This information is
provided for SAFETY and to PREVENT

1 . Read all manuals included

with this product
carefully . Be thoroughly
familiar with the controls
and the proper use of the
equipment .

2 . Only persons well acquainted with

these rules of safe operation should
be allowed to use the air tool .

Do not

exceed

maximum operating pressure
of the air tool (90 PSI). The air
tool could explode and result
in death or serious personal injury.

3 . Do not exceed any pressure rating of

any component in the system .

4 . Disconnect the air tool from air

supply before changing tools or
attachments, servicing and during
non-operation .

Safety

glasses

and ear protection must be
worn during operation.

5 . Do not wear loose fitting clothing,

scarves, or neck ties . Loose clothing
may become caught in moving parts
and result in serious personal injury .

6 . Do not wear jewelry when operating

any tool . Jewelry may become
caught in moving parts and result in
serious personal injury .

7 . Do not depress trigger when

connecting the air supply hose .

8 . Always use attachments designed

for use with air powered tools .
Do not use damaged or worn
attachments .

Do not use hand

tool sockets. Use

impact quality sockets only. Hand
tool sockets are “glass-hard” and will
shatter and can cause serious personal
injury if used with air tools.

EQUIPMENT PROBLEMS . To help
recognize this information, observe the
following symbols .

Danger indicates an

imminently

hazardous situation which, if not
avoided, WILL result in death or serious
injury.

Warning indicates a

potentially

hazardous situation which, if not
avoided, COULD result in death or
serious injury.

Caution indicates a

potentially

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates

important

information, that if not followed, may
cause damage to equipment.

NOTE:

Information that requires special

attenion

General Safety Information

CALIFORNIA PROPOSITION 65

You can

create

dust when you cut, sand, drill
or grind materials such as
wood, paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.

GENERAL SAFETY

This product is a part of a high pressure
system and the following safety
precautions must be followed at all
times along with any other existing
safety rules .

MANUAL

REGISTER YOUR PRODUCT ONLINE NOW! http://www.chpower.net/reg