background image

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 
property damage! Retain instructions for future reference.

See Warranty on page 10 for important information about commercial use of this product.

Operating Instructions   

SN338K00

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

IN729300AV 6/09

© 2009 Campbell Hausfeld/Scott Fetzer

Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American 
National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA 
SNT-101-2002. 

For parts, product & service information

visit 

www.chpower.com

Table of Contents

Description  . . . . . . . . . . . . . . . . . . . . .  1
Unpacking . . . . . . . . . . . . . . . . . . . . . .  1
Safety Guidelines  . . . . . . . . . . . . . . . .  1
Important Safety Instructions  . . . . . .  1
Tool Components and 
Specifications. . . . . . . . . . . . . . . . . . . .  2
Operating Instructions  . . . . . . . . . . . .  4
   Lubrication . . . . . . . . . . . . . . . . . . . .  4
   Recommended Hookup. . . . . . . . . .  5
   Operational Mode . . . . . . . . . . . . . .  5
   Work Contact Element (WCE) . . . . .  5
   Loading/Unloading The Tool. . . . . .  6
   Adjusting the Fastener 
   Penetration. . . . . . . . . . . . . . . . . . . .  6
   Adjusting the Direction 
   of the Exhaust  . . . . . . . . . . . . . . . . .  6
User-Maintenance Instructions  . . . . .  6
   Clearing A Jam From The Tool  . . . .  6
   Technical Service  . . . . . . . . . . . . . . .  6
   Fastener And Replacement Parts  . .  6
   Tool Repair . . . . . . . . . . . . . . . . . . . .  6
   Assembly Procedure For Seals . . . . .  6
Fasteners  . . . . . . . . . . . . . . . . . . . . . . .  7
Troubleshooting Chart . . . . . . . . . . . .  8
Warranty  . . . . . . . . . . . . . . . . . . . . . .  10

Description

This tool is designed for picture frame 
assembly, cabinetry, casebacks, and 
crafts. Features include: convenient top 
loading magazine which holds up to 
100 staples, adjustable depth control, 
adjustable exhaust.

Unpacking

 After unpacking the unit, inspect 
carefully for any damage that may 
have occurred during transit. Make sure 
to tighten fittings, bolts, etc., before 
putting unit into service.

Model SN338K00

Safety Guidelines

This manual contains information 
that is very important to know and 
understand. This information is 
provided for SAFETY and to PREVENT 
EQUIPMENT PROBLEMS. To help 
recognize this information, observe the 
following symbols.

 Danger 

indicates

 an imminently 

hazardous situation which, if not 
avoided, WILL result in death or serious 
injury.

 Warning 

indicates

 a potentially 

hazardous situation which, if not 
avoided, COULD result in death or 
serious injury.

 Caution 

indicates

 

 a potentially 

hazardous situation which, if not 
avoided, MAY result in minor or 
moderate injury.

 Notice 

indicates

 important 

information, that if not followed, may 
cause damage to equipment.

NOTE:

 Information that requires special 

attention.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A 
RISK OF FIRE, ELECTRIC SHOCK, OR 
INJURY TO PERSONS

This manual contains safety, operational 
and maintenance information. Contact 
your Campbell Hausfeld representative 
if you have any questions.

 

When using tools, 

 basic 

precautions 

should always be followed, including 
the following:

Locate model and date code on 
tool magazine and / or body, and 
record below:

Model No.: _____________________

Date Code: _____________________

Retain these numbers for

future reference.

CALIFORNIA PROPOSITION 65

 

This product or 

  its power cord may 

contain chemicals known to the State 
of California to cause cancer and birth 
defects or other reproductive harm. 
Wash hands after handling.

 
You can create dust when 
you cut, sand, drill or grind 
materials such as wood, 
paint, metal, concrete, cement, or other 
masonry. This dust often contains 
chemicals known to cause cancer, birth 
defects, or other reproductive harm. 
Wear protective gear.

1-1/4 inch Stapler

Summary of Contents for IN729300AV

































Reviews:

Related manuals for IN729300AV