![background image](http://html.mh-extra.com/html/campagnola/nexi/nexi_use-and-maintenance-manual_488429021.webp)
Use and maintenance manual – Translation of
original Instruction.: 00, Date 23/09/2020
Page 21
Warnings
WARNING!
The Manufacturer declines all responsibilities if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current
laws (Dir. 2003/10/CE, Dir. 2002/44/CE and Legislative Decree no. 81/2008) have to be carried out either by the end-
user or by the employer: supplying the adequate personal protective equipment, informing about working risks,
health surveillance, etc....
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory disor-
ders. In case of symptoms which could be referred to over-exposure, contact a specialist. These symptoms can
be torpor, loss of sensitivity, sharp pains, itching, strength reduction or loss, complexion discoloration or struc-
tural modifications of its surface. This usually happens to one’s hands, wrists and fingers.
2.1.1 Results of the tests made according to the Laws
ELECTROMAGNETIC COMPATIBILITY LEVEL
The equipment complies with the electromagnetic compatibility directive 2014/30/CE
General warnings
WARNING!
Do not use the tool indoor or in case of potentially explosive environment.
ATTENZIONE!
•
The product is for a non-intensive use only.
• Use the tool only with the accessories indicated by the Manufacturer.
• Use the tool only from the ground, working in a stable and safe position.
• Always use adequate clothing as called for by the job. Wear protective goggles and verify that your clothes are fitting to
the body. Do not wear ties, necklaces or belts or keep loose long hair which may get caught in the moving parts. Use
anti-sliding shoes and antiperforation gloves.
• Wear a noise-abatement headset.
• Do not operate, service or repair the tool if you are under the influence of medicines, alcohol or drugs which could impair
your alertness or co-ordination.
• Only well trained and qualified personnel - who have read the use and maintenance manual carefully - are allowed to
use the tool. The safety course must be administered by the employer.
• Entrust or lend the tool only to people who are familiar with the instructions for use or trained by personnel authorized
by the employer.
• Keep the tool out of the reach of children, as well as of people with disabilities or untrained in its use and keep it away
from animals.
• The operator is the only responsible for injuries caused to other people or for damages caused to their belongings.
• Do not use the tool when you are in an unstable position or off balance, on slipping surfaces (i.e. hills or wet grass) or
wherever there is no possibility of maintaining a stable balance (i.e. steep slopes).
• Never use the tool while standing on a ladder.
• Before any routine maintenance operation, read the Use and Maintenance Manual carefully. For any maintenance op-
eration which is not indicated in this manual, please contact one of the Service Points authorized by the Manufacturer.
• Use the tool just for the purposes described in par. “Product description”. Any other use may cause injuries.
• Remove the battery (14) before any maintenance operation.
• Keep this manual with care and read it before any tool use.
• Keep in perfect conditions all the danger and safety indications stickers.
• Do not use petrol, solvents or other caustic products to clean the tool.
• Avoid working in bad weather conditions, such as in case of fog, rain, strong wind, hail storm, snow or ice.
• Before operating the tool, check whether the adjusting tools have been removed. Any tool left on the rotating parts of
the tool could cause injuries.
• Leakage of liquid from the battery could cause injuries to the operator. Do not touch the battery fluid. In case of contact,
rinse abundantly with clean water. If the liquid comes into contact with the eyes, thoroughly rinse with clean water and
immediately contact a specialized doctor.
WARNING!
Carefully read the following instructions. Neglecting them could cause electric shocks, fire or serious damages.