41 - 64
LED 1
LED 2
Señales
(power)
(carga-baterias)
1
OFF
OFF
• enchufe del cable de alimentación no insertado
2
ON
OFF
• batería no conectada
3
ON
ON
• LED 2 verde: batería recargada
4
ON
INTERMITENTE
• batería en carga (luz verde) o perjudicada (luz roja)
5 - UTILIZACIÓN DE LA HERRAMIENTA
5.4 Utilización del carga-baterías
•
El control del estado del carga-baterías (3) se hace por medio de dos LEDS luminosos, el LED1 (5), el LED2 (6). Para
Energy 6 hay únicamente un LED que produce luz verde (intermitente si la batería está en carga, fija si está completa-
mente recargada) o roja (si la batería se ha perjudicado). La carga de la batería (2) sigue la secuencia temporal de 1 a 4.
•
Si se inserta una batería (2) nueva y/o completamente descargada, el carga-baterías (3) empieza una fase de pre-
formatación a baja corriente. El LED 1 (5) está encendido, el LED 2 (6) relampaguea. Solo cuando la batería (2) ha
alcanzado el valor correcto de tensión, empieza la fase de recarga.
•
El tiempo de recarga de la batería (2) depende de la capacidad de las celdas y de la carga residual. El tiempo máximo de
recarga es 12 horas.
5.5 Averías, causas, soluciones
AVERÍA
Paro momentáneo de la herramienta
durante el uso (el LED relampaguea -
dibujo E).
La herramienta no tiene la potencia ade-
cuada.
El LED 1 (5) del carga-baterías (3) no
se enciende.
El LED 2 (6) del carga-baterías (3) no
se enciende.
Cualquier avería más no especificada.
Paro de la herramienta durante el traba-
jo (el LED de Power 12 está apagado –
dibujo E)
CAUSA
• Batería (2) descargada.
• Batería (2) descargada.
• Carga-baterías perjudicado.
• Carga-baterías perjudicado.
• Funcionamiento incorrecto del com-
ponente.
• Bloqueo de seguridad de la ficha
electrónica de la batería
SOLUCIÓN
• Volver a cargar la batería.
• Volver a cargar la batería.
• Llevar a un centro de asistencia autori-
zado.
• Llevar a un centro de asistencia autori-
zado.
• Llevar a un centro de asistencia autori-
zado.
•
Recargar la batería