Camlab CW8200, Manual

Page: 42 / 48

40
2.5 Data transfer
Switch the instrument and the personal computer or printer off. Connect the instrument
(RS232 interface) and the serial interface of the personal computer or printer using a cable in
line with the specified assignment (see technical data). The cable for connection to a personal
computer is included in delivery contents.
2.5.1 Connection to a printer
Printer with a serial connection are suitable for connection with the instrument
(see chapter 3.4 Technical data interface).
A suitable tabel printer is the p r i n t e r
D P N 2 3 3 5.
Before using the printer DPN 2335 with the instrument you should change the following
standard adjustments:
(Detailed information of changing the adjustment you will find in the printer manual).
Baud-rate:
9600
Parity: None
Data bits: 8
Note: The printer must be connected and switched on before printing.
Caution: Adjust printing parameter in Mode 29. See chapter 2.4.3 Printing Parameter.
2.5.2 Data transfer to a personal computer
Transferring test results from the instrument to a personal computer requires a transfer pro-
gram, e.g. HyperTerminal.
Please find detailed information at our homepage on the download-area.
2.5.3 Internet-Updates
It is possible to update new software applications and additional languages via internet. Please
find detailed information at our homepage on the download-area.
Remark:
To prevent loss of stored test results store or print out them before performing an Update.