Camlab CW8200, Manual

Page: 36 / 48

34
Printing Parameter
Press MODE [2] [9] keys.
Confirm with [ ] key.
The display shows:
Press [1] key to select ”Protocol”.
The display shows:
Press arrow key [ ] or [ ] to select the required Protocol
(Xon/Xoff, Hardware, no control)
Confirm with [ ] key.
Finish with ESC key.
Flow Control will be set to the selection displayed at "is".
Press [2] key to select ”Baudrate”.
The display shows:
Mode
2 9
ESC
1
2
<printing parameter>
1: Flow control
2: Baud rate
cancel:
ESC
<Flow Control>
is: Hardware
select: [ ] [ ]
save:
cancel: ESC
<Baud rate>
is: 19200
select: [ ] [ ]
save:
cancel: ESC