Camlab CW8200, Manual

Page: 18 / 48

16
2.3.3 Storing results
Press [STORE] during the test result is displayed.
The display shows:
We advise you to enter a numeric code (up to 6
digits long). (A code-No. can contain references to the
operator or the sample-taking place.)
After entering confirm with [ ] key.
If a code number is not necessary confirm by pressing
[ ] directly. (The assignment for the Code-No. is then
0 automatically.)
•
•
Store
Code-No.:
_ _ _ _ _ _
0 0 0 0 0 1
Place the vial in the sample chamber making sure that the
positioning is correct.
Close the sample chamber with the cap.
Press [Read / Avg] or [Read] key.
The result is shown in the display in NTU.
Remove the vial and clean it.
Read
Avg
or
Read
1.02 NTU
*
or 1.00 NTU