Cameron NUFLO 1141C, User Manual

Page: 24 / 120

Scanner 1141 Hardware User Manual
24
The Scanner can be powered by a solar panel or a 6-28 VDC power supply (10 amps, max.). To connect
power to the instrument, perform the following steps:
1. Wire the solar panel or power to the barrier terminal block in the back of the 1141 enclosure,
connecting the red wire (+) to terminal 2 and the black wire (–) to terminal 3, as shown in Figure
2.8. For an 1141G, it is acceptable to wire directly to the Power+ and Power- terminals (terminals
2 and 3) in the top right corner of the main circuit board (Fig. 2.10)
Figure 2.10—Barrier terminal block for wiring a solar panel or power supply to the Scanner 1141
2. Open the ScanWin program and navigate to Setup> Scanner Setup>Power supply type to select
the battery type used (Figure 2.11).