Cameron Barton 199 User Manual Download Page 32

Page: 32 / 32

Product Warranty

A. Warranty

Cameron International Corporation ("Cameron") warrants that at the time of ship

ment, the products manufactured by Cameron and sold hereunder will be free from

defects in material and workmanship, and will conform to the specifications furnished

by or approved by Cameron.

B. Warranty Adjustment

(1) If any defect within this warranty appears, Buyer shall notify Cameron immedi

ately.

(2) Cameron agrees to repair or furnish a replacement for, but not install, any prod

uct which within one (1) year from the date of shipment by Cameron shall, upon

test and examination by Cameron, prove defective within the above warranty.

(3) No product will be accepted for return or replacement without the written

authorization of Cameron. Upon such authorization, and in accordance with

instructions by Cameron, the product will be returned shipping charges prepaid

by Buyer. Replacements made under this warranty will be shipped prepaid.

C. Exclusions from Warranty

(1) THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER

EXPRESSED OR IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS

FOR

A PARTICULAR PURPOSE, OR OTHERWISE.

(2) Components manufactured by any supplier other than Cameron shall bear only

the warranty made by the manufacturer of that product, and Cameron assumes no

responsibility for the performance or reliability of the unit as a whole.

(3) "In no event shall Cameron be liable for indirect, incidental, or consequential dam

ages nor shall the liability of Cameron arising in connection with any products sold

hereunder (whether such liability arises from a claim based on contract, warranty, tort,

or otherwise) exceed the actual amount paid by Buyer to Cameron for the products

delivered hereunder."

(4) The warranty does not extend to any product manufactured by Cameron which has

been subjected to misuse, neglect, accident, improper installation or to use in violation

of instructions furnished by Cameron.

(5) The warranty does not extend to or apply to any unit which has been repaired or

altered at any place other than at Cameron's factory or service locations by persons

not expressly approved by Cameron.

Product Brand

Barton® is a registered trademark of Cameron International Corporation

("Cameron").

Formerly: NuFlo Measurement Systems • Barton Instrument Systems • Caldon, Inc.

M E A S U R E M E N T S Y S T E M S

U S A

•

C A N A D A

•

U K

•

S C O T L A N D

•

C H I N A

•

U A E

A L G E R I A

•

M A L A Y S I A

•

S I N G A P O R E

•

w w w . c - a - m . c o m / f l o

+44.1243.826741

[email protected]

EUROPE,

MIDDLE EAST

& AFRICA

+603.2287.1039

[email protected]

ASIA

PACIFIC

1.800.654.3760

[email protected]

NORTH

AMERICA

281.582.9500

HOUSTON

HEAD OFFICE

Summary of Contents for Barton 199

































Search results

Summary of Contents for Barton 199

Reviews:

Related manuals for Barton 199

Brands by name

Popular brands

Cameron Barton 199, User Manual

Search results

Summary of Contents for Barton 199

Reviews:

Related manuals for Barton 199

Brands by name

Popular brands