18
Settings
Display
= Display lighting
Backligh On
= permanently on
Backligh Off
= deactivation after approx. 40 seconds of inactivity
DMXFail
= Operating status with DMX
signal interruption
Hold
= last command is held
Blackout
= activates Blackout
Dimmer-
Curve
= Dimmer Curve
Linear
= The light intensity increases linearly with the DMX value.
Exp
= Adjustment of the light intensity is finer in the lower DMX value
range and coarser in the upper DMX value range.
Log
= Adjustment of the light intensity is coarser in the lower DMX
value range and finer in the upper DMX value range.
S-Curve
= Adjustment of the light intensity is finer in the lower and upper
DMX value ranges and coarser in the middle DMX value range.
DimResp.
= Dimmer response
Led
= The spotlight responds abruptly to changes in the DMX value.
Halogen
= The spotlight behaves in a manner similar to that of a halogen
lamp with gentle changes in brightness.
WhiteBal
= White balance
Red, Green, Blue, White
= Individual white balance. Cross-operating mode setting of the 4
RGBW LED groups
Autolock
= automatic locking of the
control elements
On
= automatic locking of the control elements after 60 seconds of
inactivity. Display shows: "LOCKED"
Unlock: simultaneously press UP and DOWN for about 5 seconds
Off
= automatic locking of the control elements is deactivated
FacReset
= Reset
= Reset to factory setting
Reset
= Restart
= restarting the device while resetting the zoom motor
ENTER
UP/DOWN
/
ENTER
UP/DOWN
ENTER
ENTER
/
/
ENTER
UP/DOWN
ENTER
ENTER
/
/
ENTER
UP/DOWN
ENTER
ENTER
/
/
ENTER
/
ENTER
/
ENTER
UP/DOWN
ENTER
ENTER
/
/
ENTER
UP/DOWN
UP/DOWN ENTER
UP/DOWN ENTER
/
/
UP/DOWN ENTER
/
UP/DOWN ENTER
/
ENTER
UP/DOWN
ENTER
ENTER
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
ENTER
ENTER
