6
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
4
DMX IN
Male 3-pin XLR jack for connection of a DMX controller.
5
DMX OUT
Female 3-pin XLR connector to transmit the DMX control signal.
6
LED DISPLAY
4-digit LED display for display of the DMX start address and other information.
7
CONTROL KEYS
MODE – press MODE to enter the Edit menu to exit the menu, press MODE again. The display will now show rEAd.
ENTER – press ENTER to go one level deeper in the editing menu and to confirm value or status changes.
UP / DOWN – use the UP and DOWN buttons to change a value, such as the DMX start address or the status of a menu item.
8
WINDOW
Window to monitor the canister fill level. The canister is illuminated to make fill level monitoring easier. In the heating phase, red LEDs are
permanently on. Once the heating phase is over and sufficient haze fluid is available, blue LEDs light up. If insufficient haze fluid is available
for operation, the red LEDs and 2 segments in the displays will begin blinking as a warning signal and the fluid pump will deactivate to pro-
tect the system. Immediately disconnect the hazer from the power supply and top up the haze fluid level. The warning signal for insufficient
haze fluid will also activate even when Dark Mode is activated.
POWER IN : AC 230 V 50 Hz
POWER CONSUMPTION: 620 W
WEIGHT: 6.8 Kg
Cameo® is a registered brand of the Adam Hall Group
Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
DESIGNED AND ENGINEERED IN GERMANY. Assembled in PRC
REMOTE
DMX OUT
DMX IN
FUSE
F5AL / 250 V
MODE ENTER UP DOWN
SERIAL NR.
PHANTOM H2
PHANTOM H2
BLACK
PANTONE 429 C
PHANTOM F3
PHANTOM F5
PHANTOM H2
BLACK
PANTONE 429 C
9
11
11
10
