9
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
A
SETUP AND INSTALLATION
Place the fog machine in a suitable location on its preinstalled rubber feet. Install on a crossbeam using an optionally available transverse
clamp that is attached to the fog machine mounting bracket. Make sure that the device is firmly attached and secure it using a suitable
safety cable on the designated point (A). The maximum permitted incline of the fog machine is 30°. During setup and installation, follow the
information under
"CAUTION! IMPORTANT INFORMATION ON FOG MACHINES!"
in the safety instructions.
Important safety information:
Overhead installation requires extensive experience, including the calculation of workload
limits and installed equipment, and periodic safety checks of all installation materials and devices. If you do not have these
qualifications, do not attempt to carry out the installation yourself; contact a professional company.
TECHNICAL SPECIFICATIONS
Article number:
CLPHANTOMH2
Product type:
Hazer
Type:
Hazer per vaporization principle
Heat-up time:
Approx. 2 minutes
Heating element power:
600 W
Output volume:
Approx. 226 m³/min
Fluid consumption:
Approx. 3,5 ml/min
Canister volume:
0,8 l
Controller:
DMX512, cable remote with 10 m cable
DMX input:
3-pin XLR, male
DMX output:
3-pin XLR, female
DMX mode:
2-channel
DMX functions:
Haze output, fan rotation speed
System settings:
Dark mode on/off (display and canister illumination on/off)
Connection for cable remote:
5-pin DIN, female
Functions for cable remote:
Timer (interval, wind set, output), continuous haze output, manual haze output
Cable remote display elements:
Hazer ready for operation (green LED), continuous haze output (red LED), timer (yellow LED)
Display elements:
4-digit LED display
Power supply connection:
Permanently connected power cable with CEE 7/7 power plug
Operating voltage:
230 V AC / 50–60 Hz
Fuse:
F5AL 250 V 5x20 mm
Power consumption:
620 W
