Cameo G Series, User Manual

Page: 20 / 164

20
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
This will take you to the submenu for configuring the submenu items (see table):
Settings
DMX Fail =
Operational status with DMX
signal fault
Hold Last command is retained
User Colour 1 Activates User Color 1
Fade out 10s 10 seconds fade to blackout
Blackout
Activates blackout
Full On All LEDs 100% output
Dimmer
Curve
= Dimmer curve
Linear
Light intensity increases linearly
with DMX value
Exponential
Light intensity can be finely
adjusted at lower DMX values
and broadly adjusted at higher
DMX values
Logarithmic
Light intensity can be broadly
adjusted at lower DMX values
and finely adjusted at higher
DMX values
S-curve
Light intensity can be finely ad-
justed at lower and higher DMX
values and broadly adjusted at
medium DMX values
Dimmer
Response
= Dimmer response
LED
Light responds abruptly to
changes in DMX value
Halogen
Light behaves like a halogen
spotlight with slight brightness
changes
Red Shift
=
Accurately mimics the colour
drift of dimming a halogen
spotlight.
Off Colour drift is disabled
Spotlight, the colour tempera-
ture automatically changes
progressively to warm white
and amber (and vice versa).
On Colour drift is enabled
PWM Fre-
quency
=
Configuration of PWM frequen-
cy
800 Hz / 1200
Hz / 2000 Hz /
3600 Hz / 12
kHz / 25 kHz
Calibra-
tion
= Colour calibration
Red
Individual colour calibration.
Cross-mode brightness setting
of R, G, B, A and L with values
from 000 - 255.
Green
Blue
Lime
W-DMX =
Switching wireless control on
and off Off Wireless control disabled
On Wireless control activated