Cameo G Series, User Manual

Page: 21 / 164

21
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Status
LED
= Set status LED
Always On LED Permanently on
OFF LED off
Off after 30s
LED is switched off after 30
seconds
Power = Operating mode
Constant
Constant brightness over long
periods
Maximum Maximum brightness
Factory
Reset
= Reset to factory settings Reset?
Resetting to factory settings:
Perform reset with ENTER,
cancel with MENU
Factory
Reset WC
=
Reset to factory settings except
User Colors
WC Reset?
Resetting to factory settings
apart from User Colors:
Perform reset with ENTER,
cancel with MENU
SYSTEM INFORMATION (SysInformation)
Starting from the main display, press the encoder to enter the main menu . Select the menu item
SysInformation and confirm the selection.
This will take you to the submenu for accessing the system information (see table):
SysInformation
Firmware = Displays device firmware
Main CPU
V1.xx
Tempera-
ture
=
Displays temperature of
LED unit
LED TEMP xx °C / xx °F
Temperature
Unit
Celsius (= display in degrees
Celsius)
Fahrenheit (= display in degrees
Fahrenheit)
Operation
Hours
= Displays operating time xx:xx h
Display of the unit operating time in
hours and minutes