17
Settings
Display Rev
= Rotation of the display
by 180°
Display Rev On
Rotation of the display by 180° (e.g. overhead installation)
Display Rev Off
Normal display
Display
= automatic display
switch-off
Display On
= permanently on
Display Off
= automatic switch-off of the display after 1 minute of inactivity.
DMXFail
= Operating status with
DMX signal interruption
Hold
= last command is held
Blackout
= activates Blackout
Dim.Curve
= Dimmer Curve
Linear
= The light intensity increases linearly with the DMX value.
Exp
= Adjustment of the light intensity is finer in the lower DMX value
range and coarser in the upper DMX value range.
Log
= Adjustment of the light intensity is coarser in the lower DMX
value range and finer in the upper DMX value range.
S-Curve
= Adjustment of the light intensity is finer in the lower and upper
DMX value ranges and coarser in the middle DMX value range.
Dimmer Resp.
= Dimmer response
LED
= The spotlight responds abruptly to changes in the DMX value.
Halogen
= The spot behaves in a manner similar to that of a halogen lamp
with gentle changes in brightness.
White Balance
= White balance
Red, Green, Blue, White
= Individual white balance. Cross-operating mode setting of the 4
RGBW LED groups
IR Remote
= enables control via
IR remote control or
switch off
On
= enables control via IR remote control
Off
= disables control via IR remote control
Factory Reset
= Reset to factory
settings
Reset Now?
ENTER = Reset to factory setting
MODE = do not perform reset
ENTER
UP/DOWN
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
ENTER = Yes /
MODE = No
/
ENTER
/
ENTER
/
ENTER
/
/
ENTER
/
UP/ DOWN -ENTER
UP/ DOWN -ENTER
UP/ DOWN -ENTER
UP/ DOWN -ENTE
/
ENTER
ENTER
/
